Wednesday, October 30, 2019
Oder #315536 Essay Example | Topics and Well Written Essays - 2000 words
Oder #315536 - Essay Example Marital therapy is perhaps the best haven that people in distressed marital relationships can go to so as to help in the healing of their marriages. A skilled and experienced marital therapist provides support and assistance that can help doubtful detached partners to carefully deal with their problems and start the problem-solving and healing process (Parenting and Marital Advice 2009). Marriage is a continuous struggle to ââ¬Å"relate intimately to another human being without being controlled or taken for grantedâ⬠(Guerin, Fay, Burden & Kautto 1987, 3). It can be a good-humored effort that enhances both partners and cultivates their growth, or it can be a tedious effort, wherein one or both partners are persuaded that their emotional, as well as their physical, survival is threatened (Guerin et al. 1987). The objective of this study is to review and discuss concepts of marital relationship and therapy. First, the paper will discuss the notion of marital conflict and marital therapy. Then, two of the integral concepts in the conceptualization and treatment of relational and marital conflict, namely, loss and context/attachment history, will be discussed. Finally, the paper will discuss how marital therapists could integrate the concepts of attachment and separation anxiety in their treatment plans. Marital conflict has been defined as ââ¬Å"situations in which partners experience communication and problem-solving difficulties, find it difficult to work together, and have difficulty accepting each otherââ¬â¢s differencesâ⬠(Mead 2002, 299). It has been discovered that troubled couples interchange lesser gratifying behaviors and more unsympathetic behaviors than do non-troubled couples, and this is valid for verbal communications and for the interchange of other types of reinforcements (Shaddock 2000). It has also been discovered that troubled partners are
Monday, October 28, 2019
Globalization Interconnectedness Past and Present Essay Example for Free
Globalization Interconnectedness Past and Present Essay We can go even a further back and argue that globalization, in the logic of a growth in interconnectedness between members of different states, is itself only a special case of something more universal. In medieval Europe most people for most-of the time stayed close to where they were born. They inspired mainly local goods and, primarily, produced either for themselves or for a very local market (Schlossberg H. 1992). Economies were mainly local. Trade over considerable distances took place on water either by sea or river, which accounts for the inconsistent number of towns and villages which were either by the sea or on rivers. Human beings seem to have had a steady urge to detach themselves from the area as much as the technology of the day permitted (J Gray 1992). Certainly there have always been big movements, sometimes of populations looking for better circumstances and of conquerors building empires. Under the Roman Empire, large parts of Europe were ââ¬Ëglobalizingââ¬â¢ in this sense and the degree of globalization declined with the Empireââ¬â¢s retreat. The medieval Church could be seen as several form of globalizing force but the degrees of interaction and interdependence were much reduced in the so-called Dark Ages (Thurow L 1996). Communications are also of significance in considering the ââ¬Ënationalizationââ¬â¢ of different states. As communications enhanced (which before electronic communication meant, in fact, how fast people could travel), states had much more practical unity. This was mostly true of large states such as Canada and the United States where the railroad meant that people could travel between the major population centers, and numerous of the minor population centers, within two or three days as opposed to weeks. Markets then became national as an instant precursor to becoming international. These changes can all be measured parts of the same process (Herman E and McChesney R 1997). On this view, globalization is a trend which has been going on for centuries, which is undeniably continuing and might be accelerating. In this sense, the present period is not in itself novel. However, Scholte (1997) argues that there is more to globalization than this. For him globalization is not just communication on a global scale but deterritorialisation or superterritorialisation of numerous activities which formerly were tied to some terrain, not as a matter of an accident but as a matter of necessity. Thus, there is efficiently a global stock market. There are twenty-four hours trading in the world as a complete and traders in, say; the Tokyo markets keep a close eye on the London market on a real-time basis. There are differences. Tokyo is not just a postal (or e-mail) address of any implication but these differences are minor compared with the similarities or with the distinctions that existed even thirty years ago. It would most probably be possible to place all the worldsââ¬â¢ stock markets in a single place say on a South Sea island and it would make very little difference. It would perhaps make even less difference if this were to be done in twenty yearsââ¬â¢ time. (It might be a development. The traders might be so tempted by the sun and the good life that they would spend less time trading. Thus, trade less anxiously, and calm the often totally needless fluctuations in the various financial markets. ) On the other hand, certainly, all the traders could work from home. This is the point. The actual geographical location is trivial (Weiner E. 1992). Basically, Globalization is typically held to be inner to globalizing processes usually with the economic put up as the motor of globalization. This heaves questions not simply about the capability of the nation state to govern and the standing of national companies and economic interests but as well concerning what and who comprises civil society. As suggested by Robertson, the coexistence of nation state and civil society is busted by globalization. This offers the origin for an increase in the power of the market, but as well opens up diverse possibilities for globalize forms of sociality and practices, for what some term globalization from below (Robertson, R. 1992). Here, the connection between state and citizenship might be loosened with people playing a vigorous role in more global networks to address issues of communal concern. National governments become simply a partial focus is still influential for definite forms of popular involvement, as established by such groups as Greenpeace and definite humanitarian groups. Globalization consequently offers possibilities as well as intimidation to the extend of capitalist relations. On the one hand, for example, there is the feminization of labor where: â⬠¦global assembly lines are ââ¬Ëmannedââ¬â¢ by women workers in free trade zones; subcontracted industrial home working is performed at kitchen tables by women who ââ¬Ëhave time on their handsââ¬â¢; home-based teleworking is carried out by women who canââ¬â¢t afford day-care costs and are grateful to have paid work (Manicom and Walters 1997:72). However, practices as well expand that convey together groups pretentious by economic reformation in new ways, such as trade unions support labor and community projects exterior their own national base. Likewise, information and communication technologies (ICTs) can be utilized by contradictory groupings. Affinity groups of ââ¬Ëseniorââ¬â¢ or retired citizens, feminist scholars, individuals who share knowledge on health afflictions, hobbyists, professionals, political organizations and many others areâ⬠¦using the Internet to educate, proselytise and organize, cutting across national boundaries with apparent ease. (Goodenow 1996:200) As notions of globalization both from below as well as from above help to reframe some of the varied potential within globalization, they as well present a explicit spatial association that seems to be set within specific binaries of above-below, power-resistance and domination liberation. In other words, this is an idea of globalization already included within specific politics, rather than, a reframing of the political and definitely a resistance to it. Conclusion Thus, to compete effectively, business organizations should develop a technology strategy. Moreover, as the concept of the globalization significantly extends this concept to government; not least by giving it an influential institutional framework, but does not significantly alter its function. The global economy does, though, stand in a different relation to the government since it is no longer neutral. It is still presented as apolitical, and is consequently still understood to be ââ¬Ëeconomicââ¬â¢, but it has also become a normative and, certainly, normalizing, reality. The global economy functions in a different way with regard to the government; whilst movements in the world economy have long inclined economic policy within the government, the global economy presented as some new realism forces changes in national policy as a complete. This has the further significance, of forcing the government to distinguish between its proper function with regard to the global future and its function with regard to a sub-national, local past. Through the formation of the competition government, the homogeneity of the national economy though assumed in theory is cooperating in practice. The national private economy ceases to be believable as a homogenous unity and becomes a single but distinguished space. This has, certainly, always been the case, but the mobility of capital and the disintegration of the labor-intensive fordist production systems in the North has grinded the differences between regions of the similar government.
Saturday, October 26, 2019
Problems With Standardized Testing Essay -- Standardized Testing Essay
In Standardized Testing and Its Victims, an article written for Education Week, Alfie Kohn states: Standardized testing has swelled and mutated, like a creature in one of those old horror movies, to the point that it now threatens to swallow our schools whole.... Our children are tested to an extent that is unprecedented in our history and unparalleled anywhere else in the world. While previous generations of American students have had to sit through tests, never have the tests been given so frequently, and never have they played such a prominent role in schooling. (1) Kohn accurately describes one of the main flaws in Americaââ¬â¢s education system: standardized testing. According to the article No Child Left Behind, legislation passed in 2002 requires schools to submit scores to the state every year for evaluation (1). Originally intended to be used for improvement, the scores of these annual assessments are overused and have become the sole representation of a schoolââ¬â¢s success. It is nearly impossible to create an advanced future by reforming schools based on an unreliable assessment tool. Standardized testing is an inaccurate measurement of a studentââ¬â¢s abilities because it ignores other forms of aptitude, discriminates against certain students, and negatively affects education methods. Standardized testing piles an immense amount of pressure onto all parties involved. A report compiled by Joan L. Herman and Shari Golan entitled Effects of Standardized Testing on Teachers and Learningââ¬â Another Look explains the main causes of pressure from standardized testing. School districts use the scores to evaluate teachers and hold teachers accountable for the scores. Insufficient performance could endanger the teacherââ¬â¢s job and poten... ...a.edu/products/reports/Tech334.pdf Hicks, Molly G. ââ¬Å"The Cons of Standardized Testing.â⬠Standardized Testing. n.p., 2005. Web. 14 April 2012. http://astro.temple.edu/~mhicks/standardizedtestingcon.html ââ¬Å"How Standardized Testing Damages Education.â⬠Fairtest. n.p., 20 Aug 2007. Web. 17 April 2012. http://www.fairtest.org/facts/howharm.htm Kohn, Alfie. ââ¬Å"Standardized Testing and Its Victims.â⬠Education Week. Editorial Projects in Education, 27 Sep. 2000. Web. 15 April 2012. http://www.edweek.org/ew/articles/2000/09/27/04kohn.h20.html ââ¬Å"No Child Left Behind.â⬠Education Week. Editorial Projects in Education, 19 Sep. 2011. Web. 14 Apr. 2012. http://www.fairtest.org/facts/howharm.htm Young, Katie. ââ¬Å"Whatââ¬â¢s So Bad About Standardized Testing?â⬠Standardized Testing. Michigan State University, n.d. Web. 17 April 2012. https://www.msu.edu/~youngka7/cons.html
Thursday, October 24, 2019
Humorous Wedding Toasts to the Newlyweds :: Wedding Toasts Roasts Speeches
Humorous Wedding Toasts to the Newlyweds Learning to Love To the newlyweds, When you learn to love hell, you will be in heaven! Forsake Not Forsake not an old wife, for the new is not comparable to her. A new wife is as new wine: when she is old, thou shalt drink her with pleasure. A Clean Shirt Hereââ¬â¢s that you may always have A clean shirt A clean conscience And a dollar in our pocket. Health and Prosperity Hereââ¬â¢s to health and prosperity, To you and all your posterity. And them that doesnââ¬â¢t drink with sincerity, That they may be damned for all eternity! Diplomacy Getting married is like getting a masters degree in diplomacy. In just two short years you will develop the ability to tell your husband to go to hell, So that he will look forward to making the trip. Facing Problems Sooner or later, in every marriage, you will encounter problems: When this time comes, you must take the bull
Wednesday, October 23, 2019
Smed, Continuous Improvement Activity for Crank Changeove
GM INDIA POWERTRAIN PROJECT TRAINEE TOPIC SUMMARY Name of Trainee: SYAMLAL. A. R Qualification: Mechanical Engineering Institute: National Institute of Technology, Calicut Project Guide: Vinayak Angane Title of the project: SMED (Single Minute Exchange of Die), continuous improvement activity for crank changeover process. Brief Description of the project: Use SMED techniques to reduce changeover time through system for crank machining to throughput simulation approved levels. Activities to be performed by trainee: * Update crank changeover board to reflect the current. Create and manage tracking sheet of changeover issues and countermeasures. * Measure changeover times by operation. * Get changeover within ââ¬ËOEMââ¬â¢ specified timing by end of project. Learning/Expectation of the trainee at the end of term: * Understand process of manufacturing crankshaft. * Understand how to implement continuous improvement process on shop floor. * SMED research and implementation. ACKNOWLED GEMENT I would like to express my gratitude to all the people in the General Motors Power Train department for helping me with my project.I would like to thank the Human resources managers who gave me an opportunity to undertake such a project in a world renowned company as General Motors. I would also like to thank all the operators who passed on all the knowledge that they could in two months to help me understand all the processes. They also helped me in various situations where it seemed that my project would come to a standstill, giving me exactly what I needed to go on. Next I would like to thank the each and every single person in the crank line who helped me and guided me in every step.They provided me with the resources and made suggestions that helped me improve and build a base for my ideas. I would also like to thank my fellow project trainee who had much more experience than me. He helped me to take off on my own path to completing the project with his valuable suggesti on and ideas. Above all I would like to thank him for being a very good friend at the hour of need. I cannot fail to mention the undying support of Mr Kisan Kapse, Mr Prashant Kurde and Mr Bharat Sawant who helped me in every stage of the project. They were of great help in difficult times.I am deeply in debt to them whose stimulating suggestions and encouragement helped me in times. Last but not the least I would like to thank my project guide Mr Vinayak Angane who looked closely throughout the project, correcting and offering suggestions for improvement. He took time off his busy schedule to explore me with alternate approaches to my problem and with ideas that could never have occurred to me on my own. INTRODUCTION The General Motors powertrain in Pune machines cam carrier, cylinder Head, cylinder block and crankshaft. GMI powertrain in Pune is a level IV flex plant.This power train plant is the one and only Level IV Flex plant in India. A level IV flex plant means that the plant can machine different types of the same component in the same machine. This is done by changing the die holding the component and also changing the program mentioning where to machine. My project revolves around the SMED of crankshaft. Some different parts constitute of the Cylinder block, Cylinder head & the Crankshaft. The crankshaft is the part of an engine which translates reciprocatinglinearpiston motion into rotation.Basically the crankshaft powers the engine. Crankshafts can be monolithic (made in a single piece) or assembled from several pieces. Monolithic crankshafts are most common, but some smaller and larger engines use assembled crankshafts. The different types of crank made in GM Powertrain Talegeon plant are 1. 0 xSDE, 1. 2 BDOHC, 1. 3 xSDE and 1. 4 BDOHC. SMED (Single Minute Exchange of Die) is a method for rapidly and efficiently converting a process from running the current product to running the next product. SMED is also often referred to a Quick Changeover.The SMED method can, and often is, used in starting up a process and rapidly getting it to running condition with minimum waste of time. SETUP CHANGE / CHANGEOVER Setup change/ Changeover is preparation, execution of activities in work station which includes hardware changes, sometimes software changes e. g. : locator centres, chuck jaws, steady program calling etc. to produce good to good parts. Change over time is defined as the time difference of the last product produced and the next new product produced with the right quality and at the right speed. The production capacity of a plant is determined by the changeover time.Unless the changeover time is reduced to the bottleneck the production canââ¬â¢t meet the target Production sites with long setup times are characterised by * Low flexibility of the component * Large batch sizes * High levels of stock If we decrease the setup change time then we could use the extra capacity either to increase productivity or to decrease the batch sizes. There are many benefits likereduction in lead time and therefore increased, improved and faster delivery, higher productivity and therefore satisfying customer needs faster, Reduction in working capital, less disturbances etc.SINGLE MINUITE EXCHANGE OF DIE (SMED) The process of changing die is called Single Minute Die Exchange (SMED). Single-Minute Exchange of Dieà (SMED) is one of the manyà lean productionà methods for reducing waste in a manufacturing process. It provides a rapid and efficient way of converting a manufacturing process from running the current product to running the next product. This rapid changeover is the key to reducing production lot sizes and thereby improving flow. The phrase ââ¬Å"single minuteâ⬠does not mean that all changeovers and start-ups should take only one minute, but that they should take less than 10 minutes.In short it should be a single digit number. The different features of SMED are: * It is a systematic approach that decr eases disturbances and problems * The main factor that can lead to its success are team work & creativity * SMED methods are used for exchange of dies, but it can also be used for cleaning and for maintenance purposes. IMPORTANCE OF REDUCING CHANGEOVER TIME Reducing changeover time is like adding capacity, increasing profitability and can help most manufacturers gain a competitive edge.Image a pit crew changing the tires on a race car. Team members pride themselves on reducing changeover by even tenths of a second because it means that their driver is on the road faster and in a better position to win. The same philosophy applies to manufacturing ââ¬â the quicker you are producing the next scheduled product, the more competitive you are. Reducing changeover times is a fundamental requirement of any company to take lead over the other in production and maintaining top position.By understanding the principles and practices of the SMED system organisations will be able to cut chang eovers by over 50% with very little expenditure, and to single minutes with the modification of tooling and fastening systems. Single Minute Exchange of Dies can be applied to any changeover operation and aims to reduce the overall downtime for a complete changeover to less than nine minutes. An understanding of the operational benefits to be gained from the fast exchange of tooling. The interaction of a multi-disciplined workforce constructively looking to eliminate waste from the changeover process.How unstable setups can adversely affect subsequent operations and how standard operating procedure can eliminate these concerns. A team approach in understanding the methodology used in applying SMED through theoretical explanation and practical involvement in actual changeovers. SMED IMPLEMENTATION To successfully implement SMED in a system is a difficult task. Therefore to successfully guarantee the implementation of the process, the following steps should be followed closely. STEP 1 ââ¬â FOCUS * Start by choosing the right equipment to start with. . This is normally a bottle-neck with long set-up times STEP 2 ââ¬â BUILD THE RIGHT TEAM Work cross-functional. Operators, Technicians, Engineers and Managers should worktogether STEP 3 ââ¬â MEASURE AND SET GOALS * Visualize the present situation and agree on a common goal STEP 4 ââ¬â 5S * To succeed you will need a clean and well organized work-place. A 5S implementation is recommended. This process will be explained in detail as we move ahead. STEP 5 ââ¬â ANALYSIS * Keenly observe the operations and processes. Analyze the present situation video-technique. The different moments are classified as being external or internal and waste or not waste. All known disturbances are listed as well.STEP 6 ââ¬â SEPARATION BETWEEN INTERNAL AND EXTERNAL MOMENTS * The purpose is to secure that all external set-ups are performed when the machine is running. Use checklists, function controls and improved tran sports. For example collect necessary tools and consumables before the next operation starts up or sharp the tools before activity starts. STEP 7 ââ¬â ELIMINATION OF WASTE * Measures are carried out to reduce all types of waste. This includes: * Elimination of all need for adjustments. * Exchange of bolts for quick-fasteners. * Standardized parts, tools, dimensions Need for quality control STEP 8 ââ¬â FOLLOW UP AND IMPROVE * Each changeover should be so planned that it is better and faster than the previous one. Each changeover should be analysed and properly documented which includes suggestion that could make it faster THE 5S SYSTEM ââ¬Å"5Sâ⬠is a method to create a safer, cleaner, and better-organized workplace. The five S in the process stand for: * SET IN ORDER The principle here is to keep things in their proper places. One guide to proper placement is to keep frequently-used items handy, and store other things where they can be found.In reference to a workplace , it means: At present the tools required for the changeover process are stored in red tool carts and the carts are kept in a specific location for easy access. The tool carts are rolled to the machine where changeover is taking place at the required time. SORT Every tool which is used for a changeover process must be tagged and identified properly. All the operators involved in the changeover must be aware of the location and purpose of the tool. SHINY CLEAN This is the exception ââ¬â the only one-time activity in the 5S method. This stage has two goals: Determine and gain agreement on the desired level of cleanliness * Learn how to make new routines so this will become standardized STANDARDIZED CLEANUP In this phase consider the sources of dirt: air-borne dust; sawdust or other dry powder from cutting operations; splatter from wet processes; or simple trash because there is no proper container. A practical target is to have all workers take five minutes every day to tidy up af ter themselves ââ¬â including the time to complete and sign the checklists. Supervisors should monitor compliance with the clean-up. The checklists make this both important and achievable.SUSTAIN This phase is perhaps the most important concept that includes instilled discipline, self-discipline, common cultural values, and self-motivated practice to improve. This step requires continued management support and communication. It brings out the leadership qualities of the employees and also improves their human values too. All these activities should be followed up on a regular basis with full commitment and hard work from all operators as well as managers for SMED to be a success. ACTIVITIES PERFORMED * Understood process of manufacturing crankshaftUnderstood the process of manufacturing crankshaft with the process flow of current status and different machines involved. * Understood activities performed by different machines OP 10:Machine: HELLER * Mill the lengths * Centring * O rbital and hollow milling OP 20:Machine: HELLER * Rough milling of mains/pins incl. * Counter weights and incl. * Rough diameter of mains and pins OP 25:Machine: HELLER * Broaching of mains and journals OP 30:Machine: HELLER * Outer Diameter milling of pins OP 40 (A & B):Machine: NTC * Drill and camphor oil holes OP 50:Machine: ELOTHERM * Washing Hardening (only for xSDE) * Tempering (only for xSDE) OP 60:Machine: HEGENSCHIEDL * Deep rolling * Strengthening OP 70:Machine: NTC * Recenter both ends OP 80:Machine: NILES-SIMMONS * Finish turning * Thrust face and hub outer diameter and post end shoulder * Post process measuring OP 100 (A & B):Machine: LANDIS * Grinding mains and pins OP 110 (A & B):Machine: NTC * Ream index holes * Milling keyway * Machine reluctor ring holes and flange holes OP 120:Machine: ROBOTIC * Brush * Check oil holes OP 140:Machine: LANDIS * Grinding Flange and post ends OP 160:Machine: SCHENK BALANCE Balancing OP 170:Machine: SUP FINA * Polish mains and pins * Thrust face and flange outer diameter (2 stations) OP 180:Machine: FINE TEC * Wash and dry OP 190:Machine: HOMMEL * Final inspection (2 stations) OP 200:Machine: MANUAL * Manual assembly of dowel pin SMED FOR CRANKSHAFT CHANGEOVER My project revolves around the changeover process in the crankshaft line. My project activities can be divided into the following: * Documentation of the changeover process for the entire crankshaft line. * Identified and separated internal and external activities for the changeover process. To define separate activities for different operators. My activity here consists of reducing changeover time. TO REDUCE CHANGEOVER TIME USING SMED TECHNIQUES The steps involved in reducing the changeover tie using this method are: 1. Observe the current methodology 2. Document it appropriately 3. Separate the INTERNAL and EXTERNAL activities. Internal activities are those that can only be performed when the process is stopped, while External activities can be done whil e the last batch is being produced, or once the next batch has started.Make sure it is properly documented. 4. Do most of the activities to be done during the changeover to be done when the previous batch is being done or while the buffer is running. 5. Try to simplify each and every process. 6. The procedure as well as the measures taken to simplify the timings should be well documented and easily accessible. 7. Keep a standard improvement percentage for each new changeover. Teamwork, meaning several operators sharing changeover operations in order to minimize the stop time is also scarce.As changeovers take time, cause productivity loss and carry costs, the temptation is to dilute them in changing less often by launching bigger batches. This policy ends up with higher inventories and lower agility for the production. Documented the current changeover process The machine is usually stopped and all changeover operations happen in sequence, while the machine is stopped. The machine w ill start again only after completion of adjustments and trials. Most often all these operations are done without any standard method nor procedures or checklists.This means the changeover sequence, and hence its duration is related to individual know-how, skills and habits. During this stage: * Agreed on the start and end of the changeover * Observed the changeover * Recorded ALL observations * Organized it and created changeover table * Record times for each element The time required for each individual steps were measured and added to the table for OP 20, OP 25, OP 30 and OP 40. Recorded and organized all observations for OP 20, OP 25, OP 30, OP 40, OP 60, OP 70, OP 80, OP 100 and OP 160 and created a table as follows:Separated INTERNAL and EXTERNAL activities Another important process is separating the internal and external activities performed during changeover. This is a serious procedure which must be done with a lot of care, which will help in the reduction of changeover tim e. During this stage: * Identified whether each step in the changeover is ââ¬Ëinternalââ¬â¢ or ââ¬Ëexternalââ¬â¢ * INTERNAL activities are those which can be performed only when the machine is stopped (e. g. : removing or clamping jaws) * EXTERNAL activities are those which can occur while the machine is running (e. g. returning tools to storage after use and bringing new tools to the machine) * Separated each step involved in changeover to internal and external Separated activities for OP 20, OP 25, OP 30, OP 40, OP 60, OP 70, OP 80, OP 100 and OP 160 and added in the same table. Different external activities consist of: * Having everything prepared before stopping the machine (checklists) * Any preheating, pre-cleaning, presetting that could be completed * Standardizing changeover parts with attachments/improvements to help speed up centering and securing * Cleaning and keeping new changeover parts to be changedDefined activities for both team members During the next p hase of the project, I defined activities for both the team members involved in the changeover, i. e. the steps that must be performed by first operator and second operator were classified. The thought of parallel operations leads mainly to the following features: * Two or more people doing different jobs at the same time (e. g. : while first operator removing tool, second one bringing tool trolley in position in case of OP 20) Two people working together on one operation (e. g. : Both the operators changing over OP 40 A and OP 40 B simultaneously Others * Recorded the different tools and the auxillary equipments required to complete the changeeover * The different tools used in every step of changeover were noted down. * Bolt size of different allen screws were recorded * Auxillary equipments needed such as torque wrench, ratchet etc. were added in the same tabe * Organized changeover parts in the part trolleyAs part of the implementation of 5S system, inorder to reduce the part se arching time, each and every part involved in the changeover process were photographed. These photos were stick inside the machine tool trolley and hence the part searching time was reduced. * Improving location labeling to make items easier to find * Organized changeover parts in part trolley with photos having part number and part name on them * Hence reducing the time required for accessing the correct part * Deskilling and avoiding confusion SAMPLE PICTURE * The photographs were stick inside the tool trolley For different models, differents racks were provided so as to avoid confusion * In one rack, the space wasseparated inorder to fit to all the parts to be changed over All the above processes helped in reducing the part searching time and also worked as an alternate checklist. Also created a chelist of different parts to be changed for different operations. * Measured changeover time by station * Plotted graph with comparison of actual time taken by station for changeover to simulation * Plotted graph for total time taken for changeover for OP 20 to OP 180 Plotted graph for time taken to changeover from model 1. 0 to 1. 2 for OP 20 to OP 180 * Plotted graph for time taken to changeover from model 1. 0 to 1. 2 for OP 20 to OP 180 Suggestions * Providing power tool for all loosening and tightening processes instead of Allen key * Power tool will reduce about: 15 min for OP 20 3 min for OP 25 9 min for OP 30 * OP 40 * Changeover both OP 40 A and OP 40 B simultaneously * Reduce machine lockout time by making bed flush valve in action which was not noticed earlier * Hence solved problem of chips getting stuck in burr OP 60 * Get power tool * Change the tool tray (boxes) in which rollers are placed * Arrange rollers in boxes in same order that they are to be used * Stick colour codes on box also * Make arrangement loosen minimum number of bolts and adjust measuring probe * Provide power tool for OP 80 will reduce approximately 4 min * OP 160 * Provide a plast ic kit (box) with separations which can be taken and placed inside the machine through the side door which makes the operator not to lean in and out of machine each and every time * Bearing seal on the extreme is not used for 1. xSDE which is not required to be mounted * OP 10, OP 50, OP 70, OP 100, OP 110, OP 120 and OP 180 are already changed over in time or about time CONCLUSION At the end of the project, I was able to understand process of manufacturing crankshaft, different machines used in crank line and their uses, what is changeover and its use in the plant, advantages and disadvantages of changeover and importance of reducing changeover time. As a preliminary step to the project, I studied the basic idea of SMED (Single Minute Exchange of Die) and 5S techniques.Found out how SMED techniques can be used to reduce changeover time. During the project, I documented the whole process step by step for changeover for OP 20, OP 25, OP 30, OP 40, OP 60, OP 70, OP 80, OP 100 and OP 1 60. Organized these steps and created a changeover procedure table. Defined activities for both the team members involved in the changeover in the same table. Separated internal and external activities occurring during changeover and marked it in the changeover procedure table. Time taken for each step in the same table was also recorded (for OP 20, OP 25, OP 30 and OP 40).Reduced machine lockout time for OP 40 by making bed flush valve in action which was not noticed earlier and hence solved the problem of chips getting stuck in the burr and making the cleaning process long and difficult. The changeover parts in the part trolley were organized with the help of photos having part number and part name. Measured changeover time by station and plotted graphs: * Comparison of actual time taken by station for changeover with simulation time (For OP 20 to OP 180 for last 7 changeovers) * Total time taken for changeover by stations For OP 20 to OP 180 for last 7 changeovers) * Time taken f or changing over from 1. 0 xSDE to 1. 2 BDOHC (For OP 20 to OP 180 for last 4 changeovers) * Time taken for changing over from 1. 2 BDOHC to 1. 0 xSDE (For OP 20 to OP 180 for last 5 changeovers) Updated crank changeover board to reflect current by updating different graphs required and action plan. The process to implement continuous improvement on shop floor was understood and perfected. Different steps to decrease the time taken for changeover process and to bring it under OEM specified timing was suggested.
Tuesday, October 22, 2019
Notes to; Food with Feeling by Nicola Barker Essays
Notes to; Food with Feeling by Nicola Barker Essays Notes to; Food with Feeling by Nicola Barker Paper Notes to; Food with Feeling by Nicola Barker Paper This story is about a little family; mom, Anne Marie, dad, Steve and child, Finn. Anne Marie is pregnant and the only things she do (what we read in the story) is to bake every Sunday. She hates it. She is doing it to feed the family and to be the good house mom and because she hopes that it might bring the home some homely. Steve is working a lot and is not being honest with Anne Marie. Little Finn is saying that her moms food seems to be angry, it tastes very bitter and frosty bit it too sugary and full of air. After that every meal got a feeling -often a bad feeling, because she hated it; to bake. One Sunday evening for dinner, Steve is saying that he dont want the baby and that he is tired of her cooking. Anne Marie gets quiet and go cleaning up. -Anne Marie compare baking with her baby, she says: maybe the baby Is the truth. I wanted the baby because I wanted to find out the truth about everything She Is trying to figure out what is going on -between her and her husband, her daughter, her child and her new baby. She wants to know and tell the truth. She Is trying so radar to be a good mom, but she chant only Just bake to make It good. -Steve has to accept her and first of all be honest with her. He might not love her anymore and same with her: she doesnt love him anymore. She Is tired of herself, the baby and the baking. At the end she says: l want to tell you the truth, and the truth hurts. She Is now ready to play all her cards, she will not held anything anymore. The baking make Anne Marble get out with all her frustrations and feeling. She cooks with feeling and passion; It doesnt always has to be a good feeling; In this case Its a bad feeling dying It.
Monday, October 21, 2019
Constructing the Empire State Building
Constructing the Empire State Building Ever since it was built, the Empire State Building has captured the attention of young and old alike.à Every year, millions of tourists flock to the Empire State Building to get a glimpse from its 86th and 102nd-floor observatories. The image of the Empire State Building has appeared in hundreds of ads and movies. Who can forget King Kongs climb to the top or the romantic meeting in An Affair to Remember and Sleepless in Seattle?à Countless toys, models, postcards, ashtrays, and thimbles bear the image if not the shape of the towering Art Deco building. Why does the Empire State Building appeal to so many? When the Empire State Building opened on May 1, 1931, it was the tallest building in the world - standing at 1,250 feet tall. This building not only became an icon of New York City, but it also became a symbol of twentieth-century mans attempts to achieve the impossible. The Race to the Sky When the Eiffel Tower (984 feet) was built in 1889 in Paris,à ità taunted American architects to build something taller. By the early twentieth century, a skyscraper race was on. By 1909 the Metropolitan Life Tower rose 700 feet (50 stories), quickly followed by the Woolworth Building in 1913 at 792 feet (57 stories), and soon surpassed by the Bank of Manhattan Building in 1929 at 927 feet (71 stories). When John Jakob Raskob (previously a vice president of General Motors) decided to join in the skyscraper race, Walter Chrysler (founder of the Chrysler Corporation) was constructing a monumental building, the height of which he was keeping secret until the buildings completion. Not knowing exactly what height he had to beat, Raskob started construction on his own building. In 1929, Raskob and his partners bought a parcel of property at 34th Street and Fifth Avenue for their new skyscraper. On this property sat the glamorous Waldorf-Astoria Hotel. Since the property on which the hotel was located had become extremely valuable, the owners of the Waldorf-Astoria Hotel decided to sell the property and build a new hotel on Park Avenue (between 49th and 50th Streets). Raskob was able to purchase the site for approximately $16 million. The Plan to Build the Empire State Building After deciding on and obtaining a site for the skyscraper, Raskob needed a plan. Raskob hired Shreve, Lamb Harmon to be the architects for his new building. It is said that Raskob pulled a thick pencil out of a drawer and held it up to William Lamb and asked, Bill, how high can you make it so that it wont fall down?1 Lamb got started planning right away. Soon, he had a plan: The logic of the plan is very simple. A certain amount of space in the center, arranged as compactly as possible, contains the vertical circulation, mail chutes, toilets, shafts and corridors. Surrounding this is a perimeter of office space 28 feet deep. The sizes of the floors diminish as the elevators decrease in number. In essence, there is a pyramid of non-rentable space surrounded by a greater pyramid of rentable space. 2 But was the plan high enough to make the Empire State Building the tallest in the world? Hamilton Weber, the original rental manager, describes the worry: We thought we would be the tallest at 80 stories. Then the Chrysler went higher, so we lifted the Empire State to 85 stories, but only four feet taller than the Chrysler. Raskob was worried that Walter Chrysler would pull a trick - like hiding a rod in the spire and then sticking it up at the last minute. 3 The race was getting very competitive. With the thought of wanting to make the Empire State Building higher, Raskob himself came up with the solution. After examining a scale model of the proposed building, Raskob said, It needs a hat!4 Looking toward the future, Raskob decided that the hat would be used as a docking station for dirigibles. The new design for the Empire State Building, including the dirigible mooring mast, would make the building 1,250 tall (the Chrysler Building was completed at 1,046 feet with 77 stories). Who Was Going to Build It Planning the tallest building in the world was only half the battle; they still had to build the towering structure and the quicker the better. For the sooner the building was completed, the sooner it could bring in income. As part of their bid to get the job, builders Starrett Bros. Eken told Raskob that they could get the job done in eighteen months. When asked during the interview how much equipment they had on hand, Paul Starrett replied, Not a blankety-blank [sic] thing. Not even a pick and shovel. Starrett was sure that other builders trying to get the job had assured Raskob and his partners that they had plenty of equipment and what they didnt have they would rent. Yet Starrett explained his statement: Gentlemen, this building of yours is going to represent unusual problems. Ordinary building equipment wont be worth a damn on it. Well buy new stuff, fitted for the job, and at the end sell it and credit you with the difference. Thats what we do on every big project. It costs less than renting secondhand stuff, and its more efficient.5 Their honesty, quality, and swiftness won them the bid. With such an extremely tight schedule, Starrett Bros. Eken started planning immediately. Over sixty different trades would need to be hired, supplies would need to be ordered (much of it to specifications because it was such a large job), and time needed to be minutely planned. The companies they hired had to be dependable and be able to follow through with quality work within the allotted timetable. The supplies had to be made at the plants with as little work as possible needed at the site. Time was scheduled so that each section of the building process overlapped - timing was essential. Not a minute, an hour, or a day was to be wasted. Demolishing Glamor The first section of the construction timetable was the demolition of the Waldorf-Astoria Hotel. When the public heard that the hotel was to be torn down, thousands of people sent requests for mementos from the building. One man from Iowa wrote asking for the Fifth Avenue side iron railing fence. A couple requested the key to the room they had occupied on their honeymoon. Others wanted the flagpole, the stained-glass windows, the fireplaces, light fixtures, bricks, etc. Hotel management held an auction for many items they thought might be wanted.6 The rest of the hotel was torn down, piece by piece. Though some of the materials were sold for reuseà andà others were givenà away for kindling, the bulk of the debris was hauled to a dock, loaded onto barges, and then dumped fifteen miles into the Atlantic Ocean. Even before the demolition of the Waldorf-Astoria was complete, excavation for the new building was begun. Two shifts of 300 men worked day and night to dig through the hard rock in order to make a foundation. Raising the Steel Skeleton of the Empire State Building The steel skeleton was built next, with work beginning on March 17, 1930. Two-hundred and ten steel columns made up the vertical frame. Twelve of these ran the entire height of the building (not including the mooring mast). Other sections ranged from six to eight stories in length. The steel girders could not be raised more than 30 stories at a time, so several large cranes (derricks) were used to pass the girders up to the higher floors. Passersby would stop to gaze upward at the workers as they placed the girders together. Often, crowds formed to watch the work. Harold Butcher, a correspondent for Londonsà Daily Heraldà described the workers as right there in the flesh, outwardly prosaic, incredibly nonchalant, crawling, climbing, walking, swinging, swooping on gigantic steel frames.7 The riveters were just as fascinating to watch, if not more so. They worked in teams of four: the heater (passer), the catcher, the bucker-up, and the gunman. The heater placed about ten rivets into the fiery forge. Then once they were red-hot, he would use a pair of three-foot tongs to take out a rivet and toss it - often 50 to 75 feet - to the catcher. The catcher used an old paint can (some had started to use a newà catchingà canà madeà specifically for the purpose) to catch the still red-hot rivet. With the catchers other hand, he would use tongs to remove the rivet from the can, knock it against a beam to remove any cinders, then place the rivet into one of the holes in a beam. The bucker-up would support the rivet while the gunman would hit the head of the rivet with a riveting hammer (powered by compressed air),à shovingà the rivet into the girder where it would fuse together. These men worked all the way from the bottom floor to the 102nd floor, over a thousand fe et up. When the workers finished placing the steel, a massive cheer rose up with hatsà waivingà and a flag raised. The very last rivet was ceremoniously placed - it was solid gold. Lotsà of Coordination The construction of the rest of the Empire State Building was a model of efficiency. A railway was built at the construction site to move materials quickly. Since each railway car (a cart pushed by people) held eight times more than a wheelbarrow, the materials were moved with less effort. The builders innovated in ways that saved time, money, and manpower. Instead of having the ten million bricks needed for construction dumped in the street as was usual for construction, Starrett had trucks dump the bricks down a chute which led to a hopper in the basement. When needed, the bricks would be released from the hopper, thus dropped into carts which were hoisted up to the appropriate floor. This process eliminated the need to close down streets for brick storage as well as eliminated much back-breaking labor of moving the bricks from the pile to the bricklayer via wheelbarrows.9 While the outside of the building was being constructed, electricians and plumbers began installing the internal necessities of the building.à The timingà for each trade to start working was finely tuned. As Richmond Shreve described: When we were in full swing going up the main tower, things clicked with such precision that once we erected fourteen and a half floors in ten working days - steel, concrete, stone and all. We always thought of it as a parade in which each marcher kept pace and the parade marched out of the top of the building, still in perfect step. Sometimes we thought of it as a great assembly line - only the assembly line did the moving; the finished product stayed in place.10 The Empire State Building Elevators Have you ever stoodà waitingà in a ten - or even a six-story building for an elevatorà that seemed to take forever? Or have you ever gotten into an elevator and it took forever to get to your floor because the elevator had to stop at every floor to let someone on or off? The Empire State Building was going to have 102 floors and expected to have 15,000 people in the building. How would people get to the top floors without waiting hours for the elevator or climbing the stairs? To help with this problem, the architects created seven banks of elevators, with each servicing a portion of the floors. For instance, Bank A serviced the third through seventh floors while Bank B serviced the seventh through 18th floors. This way, if you needed to get to the 65th floor, for example, you could take an elevator from Bank F and only have possible stops from the 55th floor to the 67th floor, rather than from the first floor to the 102nd. Making the elevatorsà faster was another solution. The Otis Elevator Company installed 58 passenger elevators and eight service elevators in the Empire State Building. Though these elevators could travel up to 1,200 feet per minute, the building code restricted the speed to only 700 feet per minute based on older models of elevators. The builders took a chance, installed the faster (and more expensive) elevators (running them at the slower speed) and hoped that the building code would soon change. A month after the Empire State Building was opened, the building code was changed to 1,200 feet per minute and the elevators in the Empire State Building were sped up. The Empire State Building Is Finished! The entire Empire State Building was constructed in just one year and 45 days - an amazing feat! The Empire State Building came in on time and under budget. Because theà Great Depressionà significantly lowered labor costs, the cost of the building was only $40,948,900 (below the $50 million expected price tag). The Empire State Building officially opened on May 1,à 1931, to a lot of fanfare. A ribbon was cut, Mayor Jimmy Walker gave a speech, and Presidentà Herbert Hooverà lit up the tower with a push of a button. The Empire State Building had become the tallest building in the world and would keep that record until the completion of the World Trade Center in New York City in 1972. Notes Jonathan Goldman,à The Empire State Building Bookà (New York: St. Martins Press, 1980) 30.William Lamb as quoted in Goldman,à Bookà 31 and John Tauranac,à The Empire State Building: The Making of a Landmarkà (New York: Scribner, 1995) 156.Hamilton Weber as quoted in Goldman,à Bookà 31-32.Goldman,à Bookà 32.Tauranac,à Landmarkà 176.Tauranac,à Landmarkà 201.Tauranac,à Landmarkà 208-209.Tauranac,à Landmarkà 213.Tauranac,à Landmarkà 215-216.Richmond Shreve as quoted in Tauranac,à Landmarkà 204. Bibliography Goldman, Jonathan.à The Empire State Building Book. New York: St. Martins Press, 1980.Tauranac, John.à The Empire State Building: The Making of a Landmark. New York: Scribner, 1995.
Subscribe to:
Posts (Atom)